View 1MF26-L560-00C-100_4924217.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

3MTM Shrunk Delta Ribbon (SDR) Cable Assembly
.80 mm High Speed Digital Data Transmission, 26 position 1MF26-L560-00C-XXX
* Supports new AIA Industrial Camera Link(R) Standard for new Mini Link camera to C/L frame grabber applications * 11 shielded twisted twinax pairs with four drain wires * Double overall shield with inner foil and outer braid * Rugged MDR ribbon contact type * Rugged thumbscrew retention * EMI shielded cable assembly * See regulatory information appendix (RIA) for chemical compliance information
Date Modified: December 13, 2007
TS-2121-C Sheet 1 of 3
Physical
Connector Contact Plating:
Wiping Area: 30 [ 0.76 m ] Min Gold Underplating: 100 [ 2.55 m ] Nickel
Shell Options:
Color: Beige (MDR), Black (SDR) Material: Overmolded option: Polyvinyl Chloride (PVC) & Acrylonitrile Butadiene Styrene ( ABS) Cable: Color: Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Marking: 3M Logo
Electrical
Voltage Rating: 30 V Current Rating: 0.5 A
Insulation Resistance: 1 x 108 min at 100 VDC Withstanding Voltage: 125 VAC RMS for 1 minute
Environmental
Temperature Rating: 0C to +70C
UL File No.: E86982
3M
Interconnect Solutions http://www.3M.com/interconnects/
Camera Link is a certification mark of Automated Imaging Association
3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373
3MTM Shrunk Delta Ribbon (SDR) Cable Assembly
.80 mm High Speed Digital Data Transmission, 26 position
LENGTH (See ordering information) Cable (See pinout for cable construction)
1MF26-L560-00C-XXX
High Density SDR Male Plug 26 Position
High Density MDR Male Plug 26 Position
32.0 1.26
2X M2.0 Thumbscrew 2X #4-40 thread Thumbscrew 32.0 1.26
Figure 1 MDR Straight To SDR Straight Cable Assembly
24.4 0.96
1 2 3 4 5 6 7 8 9 10 11 12 13
9.0 0.35
14 15 16 17 18 19 20 21 22 23 24 25 26
12.0 0.47
Figure 2 SDR Plug Pinout
mm [Inch] Tolerance Unless Noted 0.0 mm .1 0.00 .10
37.5 1.48
[ ] Dimensions for Reference only
1 2 3 4 5 6 7 8 9 10 11 12 13
13.0 0.51
14 15 16 17 18 19 20 21 22 23 24 25 26
Figure 3 MDR Plug Pinout
TS-2121-C Sheet 2 of 3
3M
Interconnect Solutions http://www.3M.com/interconnects/
3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373
3MTM Shrunk Delta Ribbon (SDR) Cable Assembly
.80 mm High Speed Digital Data Transmission, 26 position
CN-1 Conn. Pos. 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 25 1 14 13 26 Shell
1MF26-L560-00C-XXX
CN-2 Conn. Pos. 25 12 24 11 23 10 22 9 21 8 20 7 19 6 18 5 17 4 16 3 15 2 1 14 13 26 Shell
Base Configuration Full / Medium configuration Cable XOYOYOXOTWINAX 1 XO+ YO+ YO+ XO+ X1Y1Y1X1TWINAX 2 X1+ Y1+ Y1+ X1+ X2Y2Y2X2TWINAX 3 X2+ Y2+ Y2+ X2+ XCYclkYclkXCTWINAX 4 XC+ Yclk+ Yclk+ XC+ X3Y3Y3X3TWINAX 5 X3+ Y3+ Y3+ X3+ Ser TC+ 100 ohm 100 ohm Ser TC+ TWINAX 6 Ser TCTerminated Terminated Ser TCSer TFG- ZOZOSer TFGTWINAX 7 Ser TFG+ ZO+ ZO+ Ser TFG+ CC1Z1Z1CC1TWINAX 8 CC1+ Z1+ Z1+ CC1+ CC2+ Z2Z2CC2+ TWINAX 9 CC2Z2+ Z2+ CC2CC3ZclkZclkCC3TWINAX 10 CC3+ Zclk+ Zclk+ CC3+ CC4+ Z3Z3CC4+ TWINAX 11 CC4Z3+ Z3+ CC4INNER INNER INNER INNER SHIELD SHIELD SHIELD SHIELD INNER INNER INNER INNER SHIELD SHIELD SHIELD SHIELD DRAIN WIRE INNER INNER INNER INNER SHIELD SHIELD SHIELD SHIELD INNER INNER INNER INNER SHIELD SHIELD SHIELD SHIELD BRAID SHIELD
Cable Assembly Wiring Diagram Table 1
Ordering Information 1MF26-L560-00C-XXX (RIA E1 & C1 apply)
Length: 100 = 1m 200 = 2m 500 = 5m A00 = 10m Reference notes 1 & 2 for cable length tolerance Notes: 1. For a cable length of less than 2m, the length tolerance is +50mm / -0mm 2. For a cable length of 2m or more, the length tolerance is +3% / -0% of cable length
TS-2121-C Sheet 3 of 3
3M
Interconnect Solutions http://www.3M.com/interconnects/
3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-c
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below.
CHINA Appendix C1: China RoHS
Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below.
RIA-2217B-c
Appendix C3: China RoHS
Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below.
Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
3M Electronics Interconnect Products
6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects
Please recycle. Printed in USA. (c) 3M 2007. All rights reserved. RIA-2217B-c
3M is a trademark of 3M Company.

▲Up To Search▲

Price & Availability of 1MF26-L560-00C-100

	To Download 1MF26-L560-00C-100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .